Send a known-good ST 2110 test signal from a Windows PC
Play a test pattern, still image, mp4 file or pcap as ST 2110-20 video up to 2160p. Add a PTP-aligned ST 2110-30 test tone. The SDP is generated and the sender shows up in NMOS.
Personal $49€45495 kr, Team $199€1791 995 kr a month. No card needed for the trial.

- 720p, 1080p and 2160p at 25 to 60 Hz
- Gapped pacing
- Test tone with 1 to 16 channels
- Flash and beep for lip sync
- Moving box and frame counter
- Blackmagic IP10 as a test source
A reference stream to test the other end

Generate: send a reference
- Test pattern, still image (PNG, JPEG or BMP), mp4 file (H.264 or H.265), raw video file or pcap replay
- ST 2110-20 video in 720p, 1080p or 2160p at 25 to 60 Hz, with gapped pacing
- ST 2110-30 test tone, 1 to 16 channels, PTP-aligned to your reference
- Blackmagic IP10 as a test source
- Moving box and frame counter to test a receiver's freeze and drop detection
- Flash and beep to measure lip sync through a mixer, encoder or multiviewer
- SDP generated for you. The sender shows up in NMOS for any controller
Timing, lip sync and both paths of ST 2022-7
ST 2110-21 sender timing
Each sender against Narrow, Narrow Linear and Wide, with Cinst, VRX and TRoffset. Know which receivers it suits before it reaches them.
RTP time against PTP
How far each stream sits from PTP time, in microseconds and lines. It exposes unlocked senders, the wrong clock and timestamps in the future.
Audio and video sync
The offset between sound and picture in milliseconds, against the EBU limits.
Flash and beep
Send the flash and beep pattern through a mixer, encoder or multiviewer. Measure lip sync through the gear itself.
ST 2022-7: both paths
The app finds the red and blue paths. It shows loss per path, packets the other path rescued, loss after merging and path skew against receiver classes A, B and C. See when protection covers a fault, and when a path is gone and the protection with it.
PTP and NMOS, not bolted on
PTP monitor
Hardware timestamps show offset, path delay, Allan deviation and SMPTE ST 2059-2 TLVs. See if your grandmaster holds lock.
Built-in grandmaster
No PTP source on the bench? The toolkit becomes the grandmaster on the Intel X550 or NVIDIA ConnectX-6 Dx, with ST 2059-2 or AES67 profiles and BMCA. You always have a reference.
NMOS controller
IS-04 discovery through a registry or peer-to-peer mDNS. IS-05 connect and disconnect, and sender on/off. Same app as the analysis.
NMOS node and registry
The toolkit registers as its own NMOS node. It ships a local IS-04 registry (nmos-cpp) with a web UI for networks without one.
Questions engineers ask
Can it generate test signals, not just analyze?
The stream decodes fine but a receiver drops frames. Why?
Does it support NMOS?
What hardware do I need?
How do I get it, and what does it cost?
The full picture
This page covers one part of the 2110 Toolkit. The main page shows every part and compares the plans.
Try it on your own network
LivePictureAI SMPTE 2110 Toolkit is available today. Monthly subscription, cancel any time. Not sure it fits your network? Start a 14-day trial. Your key arrives by email straight away, no card required.
Personal
One engineer, two computers.
plus VAT where applicable
- Full analyzer: picture, scopes, audio, captions and network
- Diagnosis that puts the root cause first
- ST 2022-7, ST 2110-21 timing and lip sync
- Multiviewer with 4 tiles, recording on alarm and HTML reports
- AI analysis, 100 questions a month, and a read-only MCP server
- PTP monitor, grandmaster and NMOS controller
- Signal generator with mp4 playback, plus Blackmagic IP10
Team
Up to 5 users, 10 computers.
plus VAT where applicable
- Everything in Personal, for up to 5 users on 10 computers
- Multiviewer with up to 36 tiles
- Long-term recording to disk with file rotation
- Remote probes with REST API and alarms to syslog, webhooks and SNMP
- Priority email support
Enterprise
Larger teams and custom deployment.
- Volume seats across sites or facilities
- Deployment and onboarding support
- Direct line to the LivePictureAI team
Compare every feature, plan by plan

Request a trial and we email you the 14-day key and the download link. Enter the key on the download page to get the installer. Then activate it in the app.
Get in touch
Start a trial, ask a product question or request a feature. We follow up by email.
